Chrysler 2005 Crossfire SRT6 Service Manual page 3854

ZH
RF WHEELHOUSE SPLASH SHIELD
REMOVAL
1. Remove the right front tire and wheel assembly.
2. Remove the five plastic retainer nuts and the five
retainer screws from the wheelhouse splash shield.
3. Remove the two retaining screws from the lower
side of the rocker panel.
4. Remove the splash shield from the vehicle.
INSTALLATION
1. Install the splash shield onto the vehicle.
2. Install the two retaining screws from the lower side
of the rocker panel.
3. Install the five plastic retainer nuts and the five
retainer screws from the wheelhouse splash shield.
4. Install the right front tire and wheel assembly.
EXTERIOR 23 - 305