Chrysler 2005 Crossfire SRT6 Service Manual page 3307

ZH
31. Stake the output shaft nut to the output shaft as
follows.
a. Place the Special Tool 9078 (2) Special Tool
C-4171 onto the output shaft.
b. Rotate the Special Tool 9078 (2) until the align-
ment pin (3) engages the output shaft notch
(4).
c. Press downward on the staking tool (1) until
the staking pin (3) contacts the output shaft nut
flange (2).
d. Strike Special Tool C-4171 with a suitable
hammer until the output shaft nut is securely
staked to the output shaft.
32. Install the electrohydraulic unit (2). Tighten the
bolts to 8 N·m (71 in. lbs.).
33. Install the oil filter (4).
34. Install the oil pan (5). Tighten the bolts to 8 N·m
(71 in. lbs.).
AUTOMATIC - NAG1 SERVICE INFORMATION 21 - 237