Chrysler 2005 Crossfire SRT6 Service Manual page 3041

ZH
12. Remove the three bolts (1), attaching the steering
gear to the body of the vehicle, carefully move
steering gear out of the steering shaft then
remove the steering gear from the vehicle.
INSTALLATION
INSTALLATION
1. Turn the steering gear to the center position by
aligning the marking lines on the steering shaft and
the housing cover.
CAUTION: DO NOT use force, otherwise the lower
steering shaft (collapsible tubing) will be dam-
aged. Ensure that the connection is assembled
correctly.
2. Carefully install the steering gear coupling onto the
steering shaft.
3. Push the lower steering shaft into the steering cou-
pling then bolt steering gear onto the vehicle.
Tighten to 60 N·m (44 ft. lbs.).
GEAR 19 - 41