Chrysler 2005 Crossfire SRT6 Service Manual page 3374

21 - 304 AUTOMATIC - NAG1 SERVICE INFORMATION
3. Install the bolts (3) and tighten to 8 N·m (71 in.
lbs.).
4. Install a new oil filter..
5. Install the oil pan (5) and torque the oil pan bolts to
8 N·m (71 in. lbs.).
6. Install the oil drain plug (8) with a new drain plug
gasket (9). Torque the drain plug to 20 N·m (177 in.
lbs.).
7. Install the guide bushing (12) into the transmission
housing and install the bolt (11) to hold the guide
bushing in place.
8. Check the O-ring on the plug connector (1), and
replace if necessary.
9. Install the plug connector (1) into the guide bushing
(2). Turn the bayonet lock of the guide bushing (2)
clockwise to connect plug connector (1).
ZH