Chrysler 2005 Crossfire SRT6 Service Manual page 3344

21 - 274 AUTOMATIC - NAG1 SERVICE INFORMATION ZH
DRIVING CLUTCH K2
DISASSEMBLY
1. Remove the snap-ring (15) from the K1 inner disc carrier with integrated front gear set (1) and take off the hollow
gear (14).
2. Remove the input shaft and K2 clutch (3).
3. Remove the thrust bearing (2).
4. Remove the snap-ring (13) from K2 outer multiple-disc carrier.
5. Take out the multiple-disc pack (12).
6. Take out the disc spring (11).