Chrysler 2005 Crossfire SRT6 Service Manual page 3023

ZH
4. Install the pinch bolt (1) attaching the upper steer-
ing column to the steering gear. Tighten to 16-20
N·m (11-15 ft. lbs.).
5. Connect the clockspring harness connector.
6. Install the column trim ring.
7. Feed the clockspring harness connectors up
through the column.
8. Install the speed control switch and retaining screw
(1).
9. Install the multifunction switch and retaining screws
(1-2).
10. Connect the ignition switch harness connector.
11. Install the instrument cluster (1). (Refer to 8 -
ELECTRICAL/INSTRUMENT
INSTALLATION).
12. Install the clockspring and the retaining screws
(1). (Refer to 8 - ELECTRICAL/RESTRAINTS/
CLOCKSPRING - INSTALLATION).
CLUSTER -
COLUMN 19 - 23