Chrysler 2005 Crossfire SRT6 Service Manual page 3444

21 - 374 MANUAL - SERVICE INFORMATION
INPUT SHAFT SEAL
REMOVAL
1. Remove the transmission. (Refer to 21 - TRANSMISSION/TRANSAXLE/MANUAL - REMOVAL).
2. Remove the clutch release bearing/slave cylinder. (Refer to 6 - CLUTCH/SLAVE CYLINDER - REMOVAL).
3. Use a screwdriver (1) to pry out the input shaft seal
(2).
INSTALLATION
1. Use Special Tool 9123 Drift (1) and a mallet to
drive in the new seal (2).
2. Install the clutch release bearing/slave cylinder.
(Refer to 6 - CLUTCH/SLAVE CYLINDER -
INSTALLATION).
3. Install the transmission in the vehicle. (Refer to 21
- TRANSMISSION/TRANSAXLE/MANUAL
INSTALLATION).
-
ZH