Chrysler 2005 Crossfire SRT6 Service Manual page 3033

ZH
2. Pull the transponder coil (3) off the lock cylinder (2)
with a plastic wedge (1).
3. Push the sleeve onto the cap and turn the lock cyl-
inder to position 1 with the key.
4. Unlock the lock cylinder (1) by turning the cap
counter-clockwise through 90° and then remove.
INSTALLATION
1. Spray the outside of the lock cylinder (1) with lock
cylinder grease and insert it into the cap.
2. Push the key through the cap as far as the stop in
the lock cylinder (1).
3. Turn the cap clockwise approx. 90° until it can be
felt or heard "lock" into position.
COLUMN 19 - 33