Chrysler 2005 Crossfire SRT6 Service Manual page 3788

23 - 240 DECKLID/LIFTGATE
INSTALLATION
CAUTION: To avoid paint damage, have an assis-
tant help while installing the decklid.
Note: Loosely install the decklid retaining bolts
until decklid has been properly adjusted for fit.
1. With the aid of an assistant, position the decklid on
the vehicle.
2. Loosely install the two right side decklid retaining
bolts.
3. Align the decklid with the previously outlined wit-
ness marks.
4. Connect the wiring harness connector (2) to the
decklid.
5. Loosely install the two left side decklid retaining
bolts.
6. Verify fit of decklid to vehicle body. Adjust as nec-
essary.
7. Tighten decklid retaining bolts to 23 N·m (203 in.
lbs.).
ZH