Chrysler 2005 Crossfire SRT6 Service Manual page 3180

21 - 110 NAG1 - ELECTRICAL DIAGNOSTICS
(P0715) N3 INPUT SPEED SENSOR CIRCUIT (CONTINUED)
6.
N3 SPEED SENSOR SIGNAL CIRCUIT SHORT TO OTHER CIRCUITS
With the ignition off.
Measure the resistance from the N3 Speed Sensor Signal circuit to all
other circuits in the Transmission Solenoid Assembly harness connec-
tor.
Is the resistance above 100 kohms for all measurements?
Yes >> Go To 7
No >> Repair the N3 Speed Sensor Signal circuit for a short to
other circuit(s).
Perform NAG1 TRANSMISSION VERIFICATION TEST.
7.
N3 INPUT SPEED SENSOR SIGNAL CIRCUIT SHORT TO GROUND
With the ignition off.
Measure the resistance between ground and the N3 Input Speed Sen-
sor Signal circuit.
Is the resistance above 100 kohms?
Yes >> Go To 8
No >> Repair the N3 Input Speed Sensor Signal circuit for a
short to ground.
Perform NAG1 TRANSMISSION VERIFICATION TEST.
ZH