Chrysler 2005 Crossfire SRT6 Service Manual page 3853

23 - 304 EXTERIOR
LF WHEELHOUSE SPLASH SHIELD
REMOVAL
1. Remove the left front tire and wheel assembly.
2. Remove the five plastic retainer nuts and the five
retainer screws from the wheelhouse splash shield.
3. Remove the two retaining screws from the lower
side of the rocker panel.
4. Remove the splash shield from the vehicle.
INSTALLATION
1. Install the splash shield onto the vehicle.
2. Install the two retaining screws from the lower side
of the rocker panel.
3. Install the five plastic retainer nuts and the five
retainer screws from the wheelhouse splash shield.
4. Install the left front tire and wheel assembly. (Refer
to 22 - TIRES/WHEELS
PROCEDURE).
- STANDARD
ZH