Chrysler 2005 Crossfire SRT6 Service Manual page 3458

21 - 388 MANUAL - SERVICE INFORMATION
12. Remove the main shaft (1) from the input shaft
(2).
13. Remove the synchronizer ring (5) and the clutch
body (4).
14. Remove the cylindrical roller bearing (3) from the
input shaft (2).
15. Remove the input shaft (2) from the vise.
16. Clamp the main shaft (3) in the vise with input
end up.
17. Remove the locking ring (1), pull off the synchro-
nizer cone (2) and the clutch body using special
tool 938 and 1126.
ZH