23 - 238
DECKLID/LIFTGATE
INSTALLATION - ROADSTER
1. Install the emergency release handle (3) into the
trim panel (1).
2. Connect the emergency release cable and install
the trim panel (1) to the decklid using the fasteners
(2).
BUMPER
REMOVAL
1. Open the liftgate.
2. Remove the bolt (1) attaching the bumper to the
liftgate.
INSTALLATION
1. Position the bumper, then install the bolt attaching the bumper to the liftgate. Do not tighten the bolt at this time.
2. Close the liftgate and align it with the quarter panels. (Refer to 23 - BODY/BODY STRUCTURE/GAP AND
FLUSH - SPECIFICATIONS).
3. Tighten the liftgate bumper bolt.
ZH