Chrysler 2005 Crossfire SRT6 Service Manual page 3043

ZH
INSTALLATION - RHD
1. Turn the steering gear to the center position by
aligning the marking lines on the steering shaft and
the housing cover.
CAUTION: DO NOT use force, otherwise the lower
steering shaft (collapsible tubing) will be dam-
aged. Insure that the connection is assembled cor-
rectly.
2. Carefully install the steering gear coupling onto the
steering shaft.
3. Push the lower steering shaft into the steering cou-
pling then tighten the steering gear pinch bolt.
Tighten to 60 N·m (44 ft. lbs.).
4. Lower the engine and install the engine mount
bolts (1). Tighten to 25 N·m (18 ft. lbs.).
5. Install the ground strap to the frame.
GEAR 19 - 43