Chrysler 2005 Crossfire SRT6 Service Manual page 3349

ZH AUTOMATIC - NAG1 SERVICE INFORMATION 21 - 279
DRIVING CLUTCH K3
DISASSEMBLY
1. Remove the snap-ring (1) from the outer disc carrier (8).
2. Remove the multiple disc pack (2) and the disc spring (3) from the outer disc carrier.
3. Place Special Tool 8900 (9) on the spring plate (5) and compress the spring until the snap-ring (4) is exposed.
4. Remove the snap-ring (4).
5. Remove the spring plate (5) and the piston (6) from the outer disc carrier (8).