ZH
3. Install the hood by installing the lower bolts (2),
then installing the upper bolts (1). Tighten to 10
N·m (88 in. lbs.). (Refer to 23 - BODY/HOOD/
HOOD - INSTALLATION).
HOOD
STANDARD PROCEDURE - MOVING THE HOOD TO ITS FULLY UPRIGHT POSITION
OPENING
CAUTION: The locking button symbol "PRESS"
must be completely visible in the opening of the
gas prop rod cover tube.
1. Press the gas prop rod locking button in the open-
ing of the gas prop rod cover tube and then move
the hood to its fully upright position until locking
button catches on the detent.
HOOD 23 - 329