Chrysler 2005 Crossfire SRT6 Service Manual page 3761

ZH
POWER TOP VERIFICATION TEST
POWER TOP VERIFICATION TEST
1.
Disconnect all jumper wires and reconnect all previously disconnected components and connectors.
Operate the Power Top Switch to lower the Power Top completely.
Operate the Power Top Switch to raise the Power Top completely.
With the DRB III , confirm that no DTCs are present and that all components are functioning properly.
If a DTC is present, refer to the appropriate category and select the corresponding DTC.
Are any DTCs present?
YES >> Repair is not complete, refer to appropriate DTC.
NO >> Repair is complete.
CONVERTIBLE TOP 23 - 213