Chrysler 2005 Crossfire SRT6 Service Manual page 3474

21 - 404 MANUAL - SERVICE INFORMATION
8. Install the 3rd gear needle bearing (2), and 3rd
gear idler gear (1).
9. Install the 6th gear drive gear (3) and press onto
the countershaft.
10. Install the constant mesh gear (2) and press onto
the countershaft.
11. Install a new snap ring (1).
12. Remove the countershaft from the vise.
13. Assemble the gear train housing. (Refer to 21 -
TRANSMISSION/TRANSAXLE/MANUAL/
GEARTRAIN HOUSING - ASSEMBLY).
14. Install the transmission. (Refer to 21 - TRANS-
MISSION/TRANSAXLE/MANUAL
INSTALLATION).
SYNCHRONIZER
DESCRIPTION
When shifting, high torque transmission and frequent shift work with a reduced shift force at the same time require
a powerful synchronization unit. The multiple-cone synchronization in gears 1 to 6 meets these requirements and
therefore offers the following advantages during the shift process:
• Fast synchronization
• High level of shift comfort
• Low shift forces
-
ZH