Removing Dynamic Mac Address Entries - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - LINK LAYER CONFIGURATION GUIDE 2010-10-13 Configuration Manual

Removing Dynamic MAC Address Entries

clear bridge
clear bridge address
clear bridge interface
Copyright © 2010, Juniper Networks, Inc.
You can remove all dynamic (learned) MAC address entries from the forwarding table
for a bridge group (using the clear bridge command) or for a bridge interface (using the
clear bridge interface command). You can also use the clear bridge address command
to remove a specific dynamic MAC address entry from the forwarding table for a bridge
group.
Use to remove all dynamic MAC address entries from the forwarding table for the
specified bridge group.
Example
host1#show bridge westford01 table
Bridge: westford01 MAC Address Table
Address
--------------
0090.1a01.0205
1234.abcd.5678
host1#clear bridge westford01
host1#show bridge westford01 table
Bridge: westford01 MAC Address Table
Address
--------------
There is no no version.
See clear bridge.
Use to remove a specific dynamic MAC address entry from the forwarding table for
the specified bridge group.
Example
host1#show bridge westford01 table
Bridge: westford01 MAC Address Table
Address
--------------
0090.1a01.0205
1234.abcd.5678
host1#clear bridge westford01 address 1234.abcd.5678
host1#show bridge westford01 table
Bridge: westford01 MAC Address Table
Address
--------------
0090.1a01.0205
There is no no version.
See clear bridge address.
Chapter 15: Configuring Transparent Bridging
Action Interface
---------- -------------------
forward ATM3/3.1
discard ---
Action Interface
---------- -------------------
Action Interface
---------- -------------------
forward ATM3/3.1
discard ---
Action Interface
---------- -------------------
forward ATM3/3.1
Age
-----
0
---
Age
-----
Age
-----
0
---
Age
-----
0
489