Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - LINK LAYER CONFIGURATION GUIDE 2010-10-13 Configuration Manual page 458

JunosE 11.3.x Link Layer Configuration Guide
show pppoe interface summary
426
PADO received
PADO transmitted
PADR received
PADR transmitted
PADS received
PADS transmitted
PADT received
PADT transmitted
PADM received
PADM transmitted
PADN received
PADN transmitted
PAD packets received
PAD packets transmitted
Invalid PAD Packets:
Invalid Version
Invalid PAD Code
Invalid PAD Tags
Invalid PAD Tag length
Invalid PAD Type
Invalid PADI Session
Invalid PADR Session
Invalid PAD packet length 0
Invalid PAD packets
Total Invalid PAD packets
Insufficient Resources 0
Lockout Configuration (seconds): Min 5, Max 60
Total clients in active lockouts: 0
Total clients in lockout grace period: 0
See show pppoe interface.
Use to display the operational and administrative status of all configured PPPoE
interfaces.
Field descriptions
Total PPPoE interfaces—Number of configured PPPoE interfaces included in summary
Administrative Status
Up—Number of interfaces not affected by manual administrative intervention
Down—Number of interfaces that cannot flow because of manual administrative
intervention
Operational Status
Up—Number of interfaces that are operational
Down—Number of interfaces that are not operational
0
10
10
0
0
10
0
9
0
0
0
0
54
29
0
0
0
0
0
0
0
0
0
Copyright © 2010, Juniper Networks, Inc.