Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - LINK LAYER CONFIGURATION GUIDE 2010-10-13 Configuration Manual page 102

JunosE 11.3.x Link Layer Configuration Guide
monitor atm vc
monitor atm vp
70
host1#^C
Use the monitor atm vc command to display bit rate and packet rate statistics over a
specified time interval for one or more ATM VCs.
Use the monitor atm vp command to display bit rate and packet rate statistics over
a specified time interval for one or more ATM VPs.
You must use either command in a dedicated console or terminal session for the
duration of the monitoring session.
Specify the interface identifier and VCD (for each ATM VC) or VPI (for each ATM VP)
that you want to monitor.
To specify a nondefault time interval in the range 5–30 seconds (for ATM VCs) or
5–300 seconds (for ATM VPs) at which the router calculates bit rate and packet rate
statistics, use the optional load-interval keyword. The default time interval for either
command is 5 seconds.
To display the time at which the router calculates bit rate and packet rate statistics
for the current interval, use the optional display-time-of-day keyword.
To stop either command, press Ctrl+c.
Field descriptions
Interface—Interface identifier for the ATM interface on which the VC or VP resides
VCD—Virtual circuit descriptor that identifies the VC (monitor atm vc command
only)
VPI—Virtual path identifier of the PVC (monitor atm vp command only)
Seconds between polls—Number of seconds at which the router calculates bit rate
and packet rate statistics
Input bps/pps—Number of bits per second (bps) and packets per second (pps)
received on this interface during the specified load interval
Output bps/pps—Number of bits per second (bps) and packets per second (pps)
transmitted on this interface during the specified load interval
Time—Time of day, in hh:mm:ss format, at which the router calculates the bit rate
and packet rate statistics for the current interval
Example 1—Displays bit rate and packet rate statistics over the default (5-second)
load interval for a single ATM VC
host1#monitor atm vc atm 12/0 100
Interface
------------------ ----- -------- --------------- ---------------
ATM 12/0
Seconds
between
VCD polls Input bps/pps
100 0 --/--
Copyright © 2010, Juniper Networks, Inc.
Output bps/pps
--/--