Example: Configuring Multiclass Mlppp On A Static Interface; Monitoring Multiclass Mlppp - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - LINK LAYER CONFIGURATION GUIDE 2010-10-13 Configuration Manual

Example: Configuring Multiclass MLPPP on a Static Interface

Related
Documentation

Monitoring Multiclass MLPPP

Purpose
Action
Copyright © 2010, Juniper Networks, Inc.
The following example shows how to configure multiclass MLPPP on a static MLPPP
interface. To configure multiclass MLPPP you first define the traffic classes that need to
be mapped to the multilink classes. You configure multiclass MLPPP on the static MLPPP
interface and optionally configure fragmentation and reassembly on the interface.
Define the QoS traffic classes.
1.
host1 (config)#traffic-class video
host1 (config-traffic-class)#fabric-strict-priority
host1 (config)#traffic-class low-loss
host1 (config-traffic-class)#fabric-strict-priority
For more information about QoS traffic classes, see Traffic Class and Traffic-Class
Groups Overview.
Specify the interface and the encapsulation method on which you want to configure
2.
MLPPP
host1(config)#interface gigabitEthernet 3/0/0
host1(config-if)#encapsulation pppoe
host1(config)#interface gigabitEthernet 3/0/0.10
host1(config-if)#encapsulation mlppp
Configure multiclass MLPPP on the static interface.
3.
host1(config-if)#ppp multilink multiclass multilink-classes 3
host1(config-if)#ppp multilink multiclass traffic-class best-effort video low-loss
Configure fragmentation and reassembly on the multiclass MLPPP interface.
4.
host1(config-if)#ppp multilink multiclass fragmentation best-effort video low-loss
host1(config-if)#ppp multilink multiclass reassembly best-effort video low-loss
Configuring Multiclass MLPPP on page 348
Display information about the status and configuration of multilink classes on an MLPPP
Interface.
To display configuration information about multiclass MLPPP member links configured
in the specified MLPPP bundle:
host1#show ppp interface mlppp bundle1 config
PPP interface mlppp mlppp1 is up
...
PPP multilink member-interface gigabitEthernet 3/0.1.1 is up
Link interface administrative status is open
PPP multilink multiclass is enabled
PPP multilink multiclass classes 4
PPP multilink multiclass fragmentation is enabled on "voice", otherData"
PPP multilink multiclass reassembly is enabled on "voice", "otherData"
...
Chapter 10: Configuring Multiclass Multilink PPP
353