Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - LINK LAYER CONFIGURATION GUIDE 2010-10-13 Configuration Manual page 716

JunosE 11.3.x Link Layer Configuration Guide
684
Admin State—Administrative state of the VC subrange: up or down
Profile override(s)—When overriding profile assignments are configured on the router,
the command displays the following fields:
Interface—Identifier of the ATM AAL5 physical interface
Bulk Config Name—Name of the bulk-configured VC range on this interface that
includes the VC subrange encompassing the specified ATM PVC
VPI—Virtual path identifier of the PVC within the bulk-configured VC subrange
VCI—Virtual circuit identifier of the PVC within the bulk-configured VC subrange
Assigned Profile—Name of the overriding profile assigned to the specified PVC
with "profile atm1483 bulk-config-name pvc" on page 645
Status—Operational status of the overriding profile assignment: Active or Inactive.
Active indicates that the router uses the overriding profile to create dynamic
interface columns because no static ATM circuits with the same VPI/VCI values
exist on this interface. Inactive indicates that the router does not use the overriding
profile to create dynamic interface columns because a static ATM circuit with the
same VPI/VCI values exists on this interface.
Example 1—Displays information about base profile assignments and overriding profile
assignments for all bulk-configured VC ranges on the router. The VC range named test
consists of a single VC subrange (1, 1, 101, 200), has a base profile named
atm1483BaseProfile assigned, and has an overriding profile named overrideProfile1
assigned to two ATM PVCs within the VC subrange. The VC range named test2 is a
placeholder range that has no VC subranges configured and no base profile assigned.
host1#show atm bulk-config
Bulk
Config Start End Start End
Interface Name
------------ ------ ----- --- ----- --- ------------------ -----
ATM AAL5 3/0 test
ATM AAL5 3/2 test2
2 bulk configuration(s) found
Profile override(s):
Bulk
Config
Interface Name
------------ ------ --- --- ---------------- ------
ATM AAL5 3/0 test
ATM AAL5 3/0 test
2 profile override(s) found
Example 2—Displays information about base profile assignments and overriding profile
assignments for all VC ranges configured on a specified ATM AAL5 interface
VPI VPI VCI VCI Assigned Profile
1 1 101 200 atm1483BaseProfile
-- -- --- ---
VPI VCI Assigned Profile Status
1 151 overrideProfile1 Active
1 161 overrideProfile1 Active
Copyright © 2010, Juniper Networks, Inc.
Admin
State
up
none assigned ---