Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - LINK LAYER CONFIGURATION GUIDE 2010-10-13 Configuration Manual page 462

JunosE 11.3.x Link Layer Configuration Guide
show profile
430
Up—Number of subinterfaces not affected by manual administrative intervention
Down—Number of subinterfaces that cannot flow because of manual
administrative intervention
Operational Status
Up—Number of subinterfaces that are operational
Down—Number of subinterfaces that are not operational
LowerLayerDown—Number of subinterfaces that are not operational because an
underlying interface is down
NotPresent—Number of subinterfaces that are not operational because hardware
is unavailable
Example
host1:01#show pppoe subinterface summary
Total PPPoE subinterfaces: 116
Administrative Status:
Down: 1
Operational Status:
Down: 1
LowerLayerDown: 1
NotPresent: 0
See show pppoe subinterface.
Use to display information about profiles.
To display information about a specific profile, use the name keyword.
To display a list of profiles configured on the router, use the brief keyword.
Field descriptions
Profile—Name of the profile that is displayed
IP address—IP address and subnet mask of the interface, or none if the interface is
unnumbered
Unnumbered interface—Specifier for the unnumbered interface, or none if the
interface is numbered
Router—Name of the virtual router (VR) assigned to the profile; interfaces created
by the profile are attached to this VR
Directed Broadcast—Enabled or disabled
ICMP Redirects—Enabled or disabled
Up: 115
Up: 115
Copyright © 2010, Juniper Networks, Inc.