Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - LINK LAYER CONFIGURATION GUIDE 2010-10-13 Configuration Manual page 454

JunosE 11.3.x Link Layer Configuration Guide
422
acName—Name of PPPoE access concentrator
will not send ac info in PADS packet—When the pppoe pads disable-ac-info
command is issued, indicates that the router does not send the AC-Name and
AC-Cookie tags in the PADS packet
duplicate-protection—Whether duplicate protection is enabled or disabled for the
interface
capture remote circuit id—Whether capture of the PPPoE remote circuit ID sent from
the DSLAM is enabled or disabled for the interface
active connections—Number of live PPP connections
configured subinterfaces—Number of PPPoE subinterfaces you configured on an
interface
Assigned profile—Name of profile assigned to dynamic PPPoE interface
PPPoE Statistics Counters
PADI received/PADI transmitted—Number of initiation control packets
received/transmitted
PADO received/PADO transmitted—Number of offer control packets
received/transmitted
PADR received/PADR transmitted—Number of request control packets
received/transmitted
PADS received/PADS transmitted—Number of session confirmation control packets
received/transmitted
PADT received/PADT transmitted—Number of termination control packets
received/transmitted
PADM received/PADM transmitted—Number of message control packets
received/transmitted
PADN received/PADN transmitted—Number of network control packets
received/transmitted
PAD packets received—Total number of control packets received on the interface
PAD packets transmitted—Total number of control packets transmitted on the
interface
Invalid PAD Packets
Invalid Version—Number of control packets received with an invalid version
Invalid PAD Code—Number of control packets received with an invalid code
Invalid PAD Tags—Number of control packets received with invalid tags
Copyright © 2010, Juniper Networks, Inc.