Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - LINK LAYER CONFIGURATION GUIDE 2010-10-13 Configuration Manual page 252

JunosE 11.3.x Link Layer Configuration Guide
220
distributing—Actor link is actively distributing outgoing frames; if this field does
not appear, the Actor link is not actively distributing outgoing frames
defaulted—Actor link is using defaulted operational information about the Partner
link that was administratively configured for Partner; if this field does not appear,
the operational information about the Partner link has been received by the Actor
link in an LACP PDU
expired—Actor link's receive machine is expired; if this field does not appear, the
Actor link's receive machine is active
port—Port number assigned to the Ethernet link by the Actor link
priority—Priority assigned to this Ethernet link by the Actor link
Key—Operational key value assigned to the Ethernet link by the Actor link
System Priority—Priority assigned to the Ethernet link by the system
System MAC Address—MAC address assigned to the Actor link
Partner—Status of the Partner link
active— Partner link participates in the LACP
passive—Partner link transmits LACP PDUs
timeout—Timeout control value; short timeout or long timeout
aggregatable—Partner link can be aggregated
individual—Partner link cannot be aggregated
in-sync—Partner link has joined the correct LAG bundle
out-of-sync—Partner link has joined the incorrect LAG bundle
collecting—Partner link is actively collecting incoming frames; if this field does not
appear, the Partner link is not actively collecting incoming frames
distributing—Partner link is actively distributing outgoing frames; if this field does
not appear, the Partner link is not actively distributing outgoing frames
defaulted—Partner link is using defaulted operational information about the Partner
link that was administratively configured for Partner; if this field does not appear,
the operational information about the Partner link has been received by the Actor
link in an LACP PDU
expired—Partner link's receive machine is expired; if this field does not appear, the
Partner link's receive machine is active
port—Port number assigned to the Ethernet link by the Partner link
priority—Priority assigned to the Ethernet link by the Partner link
Copyright © 2010, Juniper Networks, Inc.