Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - LINK LAYER CONFIGURATION GUIDE 2010-10-13 Configuration Manual page 389

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Table 17: show ppp interface mlppp Output Fields (continued)
Field Name
LCP negotiated options
Configuring Multiclass MLPPP on page 348
show ppp interface
Chapter 10: Configuring Multiclass Multilink PPP
Field Description
Negotiated LCP options for the local and peer
systems:
max-receive-unit—Negotiated maximum receive
unit, in octets, for the local and remote (peer) side
of the link
max-receive-reconstructed-unit—Negotiated
maximum receive reconstructed unit, in octets, for
the local and remote (peer) side of the link
authentication—Negotiated authentication method
(none, pap, or chap) for the local and remote (peer)
side of the link
magic-number—Negotiated magic number for the
local and remote (peer) side of the link
pfc—Negotiated protocol field compression (none
or enabled) for the local and remote (peer) side of
the link
acfc—Negotiated address and control field
compression (none or enabled) for the local and
remote (peer) side of the link
multiclass-classes—Number of multilink classes
negotiated
multiclass-sequence-format—Format of the
negotiated sequence number: long or short
357