Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - LINK LAYER CONFIGURATION GUIDE 2010-10-13 Configuration Manual page 174

JunosE 11.3.x Link Layer Configuration Guide
show frame-relay lmi
142
Remove Link Acknowledgments sent—Number of Remove Link acknowledgments
sent from this interface
Remove Link Acknowledgments received—Number of Remove Link acknowledgments
received on this interface
Example 1
host1#show frame-relay lip brief
LIP information for frame relay interface 4/0:1, status is up
Number of interface down transitions is 0
Time since last status change 00:03:16
LIP information for frame relay interface 4/1:1, status is up
Number of interface down transitions is 0
Time since last status change 00:03:20
Example 2
host1#show frame-relay lip interface serial 4/0:1
LIP information for frame relay interface 4/0:1, status is up
Number of interface down transitions is 0
Time since last status change 00:05:19
Add Links sent: 1
Add Links received: 1
Add Link Acknowledgements sent: 1
Add Link Acknowledgements received: 1
Add Link Rejects sent: 0
Add Link Rejects received: 0
Hellos sent: 32
Hellos received: 31
Hello Acknowledgements sent: 31
Hello Acknowledgements received: 32
Remove Links sent: 0
Remove Links received: 0
Remove Link Acknowledgements sent: 0
Remove Link Acknowledgements received: 0
See show frame-relay lip.
Use to display configuration and state information and statistics about the LMI.
You can specify an interface type and location.
Use the brief keyword to display abbreviated PVC information.
Use the delta keyword to specify that baselined statistics are to be shown.
DTE field descriptions
Frame relay DTE interface mlframe-relay—Name of the MLFR bundle
N391—Value of the N391 full-status polling counter
N392—Value of the N392 error threshold counter
N393—Value of the N393 monitored events counter
T391—Value of the T391 link integrity polling timer interval
Copyright © 2010, Juniper Networks, Inc.