Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - LINK LAYER CONFIGURATION GUIDE 2010-10-13 Configuration Manual page 460

JunosE 11.3.x Link Layer Configuration Guide
show pppoe subinterface
428
Example 2—Displays the contents of a default PPPoE service name table with no
specific service name entries
host1#show pppoe-service-name-table name myDefaultTable
Service Name Table myDefaultTable
Empty service name action: terminate
Unknown service name action: drop
Example 3—Displays the contents of a PPPoE service name table that includes: empty
service name tag and associated action, terminate; two custom service tags and their
associated actions (terminate and drop); and the unknown service name tag and its
default action (terminate).
host1#show pppoe-service-name-table name myServiceTable1
Service Name Table myServiceTable1
Empty service name action: terminate
Service name: myISPService action: terminate
Service name: myQOSClass1 action: drop
Unknown service name action: terminate
Example 4—Displays the names of all PPPoE service name tables configured on the
router
host1#show pppoe-service-name-table brief
Service-Name Table:
myServiceTable1
myServiceTable2
See show pppoe-service-name-table.
Use to display parameters for PPPoE subinterfaces.
If you do not specify a subinterface, the router displays the configured PPPoE
subinterface number and status for all configured PPPoE subinterfaces.
If you specify an interface with no subinterface, the router displays the status for the
subinterfaces associated with the interface.
If you specify an interface and subinterface, the router displays detailed parameters
available for that subinterface.
To display configuration, status, and statistics information, use the full keyword.
Field descriptions
PPPoE subinterface—Interface specifier
Status—Operational status of the interface. Possible values are:
operStatusUp—Interface or subinterface is operational
Down—Interface or subinterface is not operational
LowerLayerDown—Subinterface is not operational because an underlying interface
or subinterface is down
URL String—URL string sent in the PADM message to PPPoE clients
Copyright © 2010, Juniper Networks, Inc.