Figure 22: Ge-2 Line Module Using Physical Port Redundancy; Figure 23: Single-Homed Ge-2 Line Module Configuration; Figure 24: Single-Homed Fe-8 Line Module Configuration (1:N) - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - LINK LAYER CONFIGURATION GUIDE 2010-10-13 Configuration Manual

JunosE 11.3.x Link Layer Configuration Guide
FE-8 Line Module
Configurations
210
Figure 22 on page 210 displays a GE-2 line module with physical port redundancy on both
ports.

Figure 22: GE-2 Line Module Using Physical Port Redundancy

Figure 23 on page 210 displays a single-homed configuration with port 0 backing up port
1 on a GE-2 line module.

Figure 23: Single-Homed GE-2 Line Module Configuration

Figure 24 on page 210 displays an FE-8 line module with a link failure in a 1:N single-homed
configuration.

Figure 24: Single-Homed FE-8 Line Module Configuration (1:N)

Figure 25 on page 211 displays an FE-8 line module with four redundant Ethernet links in
a 1:1 configuration.
Copyright © 2010, Juniper Networks, Inc.