Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - LINK LAYER CONFIGURATION GUIDE 2010-10-13 Configuration Manual page 106

JunosE 11.3.x Link Layer Configuration Guide
74
ATM Interface status—State of the physical interface: up, down
line protocol—State of the ILMI protocol: disabled, up, down
AAL5 operational status—Operational status of the ATM AAL5 interface: up, down,
lowerLayerDown
time since last status change—Time since last reported change to the AAL5
operational status
ATM operational status—Operational status of the ATM interface: up, down,
lowerLayerDown
time since last status change—Time since last reported change to the ATM
operational status
UNI version—UNI version: 3.0, 3.1, 4.0
Maximum VCs—Maximum number of virtual circuits supported on this interface
Current VCs—Current number of virtual circuits configured
ILMI VPI/VCI—Number of VPI and VCI configured for ILMI (displayed only when ILMI
is configured on the interface)
VCD—Number of VCD (displayed only when ILMI is configured on the interface)
ILMI keepalive—State and status of the ILMI (displayed only when ILMI is configured
on the interface)
Max VCI per VPI—Maximum number of virtual circuits on each virtual path
CAC admin state—Enabled, disabled
Subscription bandwidth—Maximum allowable bandwidth on the port (displayed
only when CAC is enabled)
UBR weight—Configured bandwidth for UBR and UBR-PCR connections (displayed
only when CAC is enabled)
Available bandwidth—Bandwidth currently available on the port (displayed only
when CAC is enabled)
SNMP trap link-status—Enabled, disabled
OAM cell receive status—Whether the ATM interface processes or flushes OAM cells:
enabled, disabled
OAM cell filter—Whether the interface flushes all OAM cells or flushes only AIS and
RDI alarm cells (displayed only when OAM cell receive status is enabled)
atm oam loopback-location—Loopback location ID for this interface
Interface Alias—Text description or alias if configured for the interface
Copyright © 2010, Juniper Networks, Inc.