Removing Dynamic Mac Address Entries - Juniper JUNOSE SOFTWARE 11.0.X - LINK LAYER CONFIGURATION GUIDE 4-1-2010 Configuration Manual

JUNOSe 11.0.x Link Layer Configuration Guide

Removing Dynamic MAC Address Entries

You can remove all dynamic (learned) MAC address entries from the forwarding
table for a bridge group (using the clear bridge command) or for a bridge interface
(using the clear bridge interface command). You can also use the clear bridge
address command to remove a specific dynamic MAC address entry from the
forwarding table for a bridge group.
clear bridge
clear bridge address
442
Monitoring Transparent Bridging
Use to remove all dynamic MAC address entries from the forwarding table for
the specified bridge group.
Example
host1#show bridge westford01 table
Bridge: westford01 MAC Address Table
Address Action
-------------- ----------
0090.1a01.0205 forward
1234.abcd.5678 discard
host1#clear bridge westford01
host1#show bridge westford01 table
Bridge: westford01 MAC Address Table
Address Action
-------------- ----------
There is no no version.
See clear bridge.
Use to remove a specific dynamic MAC address entry from the forwarding table
for the specified bridge group.
Example
host1#show bridge westford01 table
Bridge: westford01 MAC Address Table
Address Action
-------------- ----------
0090.1a01.0205 forward
1234.abcd.5678 discard
host1#clear bridge westford01 address 1234.abcd.5678
host1#show bridge westford01 table
Bridge: westford01 MAC Address Table
Address Action
-------------- ----------
0090.1a01.0205 forward
Interface Age
------------------- -----
ATM3/3.1 0
--- ---
Interface Age
------------------- -----
Interface Age
------------------- -----
ATM3/3.1 0
--- ---
Interface Age
------------------- -----
ATM3/3.1 0