Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - LINK LAYER CONFIGURATION GUIDE 2010-10-13 Configuration Manual page 388

JunosE 11.3.x Link Layer Configuration Guide
356
Table 17: show ppp interface mlppp Output Fields (continued)
Field Name
Interface statistics
Receive Class number
fragments in reassembly list
reordered
discarded fragments/bytes
last received sequence number
Transmit Class number
fragments
last sent sequence number
Bundle name
MLPPP interface interfaceName
Field Description
Statistics for data received by (in) and transmitted
(out) on the MLPPP interface:
packets—Number of packets received and
transmitted on the interface
octets—Number of octets received and transmitted
on the interface
errors—Number of errors received and transmitted
on the interface
discards—Number of packets discarded on receipt
or discarded before they were transmitted
fragments—Number of fragments received and
transmitted on the interface
Information about the packets of the specified
multilink class received by the router
Number of buffered fragments reassembled
Number of fragments reordered
Number of fragments and bytes that have been
discarded.
Sequence number of the last multiclass MLPPP
packet received
Information about the packets of the specified
multilink class transmitted by the router
Number of fragments that are sent by the router
Sequence number of the last multiclass MLPPP
packet sent
Name of the MLPPP bundle
Name and state (up or down) of the configured
MLPPP interface
Copyright © 2010, Juniper Networks, Inc.