Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - LINK LAYER CONFIGURATION GUIDE 2010-10-13 Configuration Manual page 466

JunosE 11.3.x Link Layer Configuration Guide
show radius remote-circuit-id-delimiter
show radius remote-circuit-id-format
434
calling-station-id—Override setting for the Calling-Station-Id attribute; value is
remote-circuit-id if configured with radius override calling-station-id
remote-circuit-id command
nas-info—Virtual router that generates the NAS-IP-Address and NAS-Identifier
attributes for AAA broadcast accounting packets; current virtual router or
authentication virtual router
Example
host1#show radius override
nas-ip-addr:
nas-port-id:
calling-station-id: remote-circuit-id
nas-info:
See show radius override.
Use to display the delimiter character configured to set off components in the PPPoE
remote circuit ID value captured from a DSLAM.
The default delimiter character is #.
Example
host1#show radius remote-circuit-id-delimiter
%
See show radius remote-circuit-id-delimiter.
Use to display the format configured for the PPPoE remote circuit ID value captured
from a DSLAM.
If the PPPoE remote circuit ID value is configured to include any or all of the
agent-circuit-id, agent-remote-id, and nas-identifier components, the display lists the
components included and the order in which they appear.
If the PPPoE remote circuit ID value is configured to use the format for the dsl-forum-1
keyword of "radius remote-circuit-id-format" on page 418 , the display indicates that
this format is in effect.
The default format is agent-circuit-ID.
Example
host1#show radius remote-circuit-id-format
nas-identifier agent-circuit-id agent-remote-id
See show radius remote-circuit-id-format.
nas-ip-addr
remote-circuit-id
from current virtual router
Copyright © 2010, Juniper Networks, Inc.