Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - LINK LAYER CONFIGURATION GUIDE 2010-10-13 Configuration Manual page 532

JunosE 11.3.x Link Layer Configuration Guide
500
PPPoE—Specifies how the bridge interface handles PPPoE packets
Relearn—Specifies whether the bridge interface can relearn a MAC address entry on
a different interface from the one initially associated with this entry in the forwarding
table; permit indicates that relearning is allowed, and deny indicates that relearning
is prohibited
Mpls—Specifies how the bridge interface handles MPLS packets
Example 1—Displays the rules for all default and nondefault subscriber policies currently
configured on the router
host1#show subscriber-policy
Subscriber: default Subscriber
ARP
Broadcast
Multicast
Unknown Destination : Deny
IP
Unknown Protocol
Unicast
PPPoE
Relearn
Mpls
Subscriber: default Trunk
ARP
Broadcast
Multicast
Unknown Destination : Permit
IP
Unknown Protocol
Unicast
PPPoE
Relearn
Mpls
Subscriber: client01
ARP
Broadcast
Multicast
Unknown Destination : Deny
IP
Unknown Protocol
Unicast
PPPoE
Relearn
Mpls
Example 2—Displays the rules for a specified subscriber policy
host1#show subscriber-policy client01
Subscriber: client01
ARP
Broadcast
Multicast
Unknown Destination : Deny
IP
Unknown Protocol
Unicast
PPPoE
: Permit
: Deny
: Permit
: Permit
: Permit
: Permit
: Permit
: Permit
: Permit
: Permit
: Permit
: Permit
: Permit
: Permit
: Permit
: Permit
: Permit
: Permit
: Permit
: Permit
: Deny
: Permit
: Permit
: Permit
: Permit
: Deny
: Permit
: Permit
: Permit
: Deny
: Permit
: Permit
: Permit
: Permit
Copyright © 2010, Juniper Networks, Inc.