Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - LINK LAYER CONFIGURATION GUIDE 2010-10-13 Configuration Manual page 367

Copyright © 2010, Juniper Networks, Inc.
pfc—Negotiated pfc (none or enabled) for the local and remote (peer) side of the
link
acfc—Negotiated acfc (none or enabled) for the local and remote (peer) side of
the link
NOTE: The command displays a value of "none" for any negotiated
option parameters if the option was not negotiated.
LCP Endpoint Discriminator options:
local discriminator class—Endpoint discriminator type, format, and address space
for the local system
local endpoint discriminator—Endpoint discriminator value for the local system
within the specified class
peer discriminator class—Endpoint discriminator type, format, and address space
for the remote system
peer endpoint discriminator—Endpoint discriminator value for the remote system
within the specified class
LCP protocol statistics:
in-keepalive-requests—Number of received keepalive requests (LCP Echo Request)
for the life of the interface (since either system boot or interface creation, whichever
is later)
out-keepalive-requests—Number of transmitted keepalive requests for the life of
interface
in-keepalive-replies—Number of received keepalive replies for the life of the
interface
out-keepalive-replies—Number of transmitted keepalive replies for the life of the
interface
keepalive-failures—Number of keepalive failures reported on the interface
max-renegotiation-terminates—Number of renegotiation terminations for the PPP
session
IPCP protocol configuration:
configured—IPCP is configured on this interface (true or false)
administrative-status—IPCP administrative status (open or closed)
ip-address—Address to be used for negotiation of local IP address option
dns-precedence—Used to resolve conflicts during DNS address negotiation
Chapter 9: Configuring Multilink PPP
335