Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - LINK LAYER CONFIGURATION GUIDE 2010-10-13 Configuration Manual page 368

Software for e series broadband services routers link layer configuration guide
Table of Contents

Advertisement

JunosE 11.3.x Link Layer Configuration Guide
336
local—Local side takes precedence, and the no ppp peer dns command is operative
peer—Remote side takes precedence, and the ppp peer dns command is operative
wins-precedence—Used to resolve conflicts during WINS address negotiation
ipcp-lockout—Terminates an invalid subscriber entry and prevents additional IPCP
negotiations (enabled or disabled)
max-negotiations—Maximum number of renegotiation attempts that the router
accepts before terminating a PPP session
IPCP protocol status:
operational-status—IPCP operational status (up, down, not present, or not present
no resources)
IPCP negotiated options:
ip-address—Negotiated IP address for the local and remote (peer) side of the link
primary-dns-address—Negotiated primary DNS address for the local and remote
(peer) side of the link
secondary-dns-address—Negotiated secondary DNS address for the local and
remote (peer) side of the link
primary-wins-address—Negotiated primary WINS address for the local and remote
(peer) side of the link
secondary-wins-address—Negotiated secondary WINS address for the local and
remote (peer) side of the link
NOTE: The command displays a value of "none" for any negotiated
option parameters if the option was not negotiated.
OSINLCP protocol configuration:
configured—OSINLCP is configured on this interface (true or false)
administrative-status—OSINLCP administrative status (open or closed)
OSINLCP protocol status:
operational-status—OSINLCP operational status (up, down, not present, or not
present no resources)
terminate-reason—Reason for termination of OSINLCP service
OSINLCP negotiated options
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.3

Table of Contents