Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - LINK LAYER CONFIGURATION GUIDE 2010-10-13 Configuration Manual page 370

JunosE 11.3.x Link Layer Configuration Guide
338
Link interface fragment size is 128
Link interface reassembly is enabled
Link interface administrative MRRU is 2000
PPP multilink member-interface ATM 10/0.13 is down (lower layer down)
Link interface administrative status is closed
Link interface fragmentation is enabled
Link interface fragment size is 128
Link interface reassembly is enabled
Link interface administrative MRRU is 2000
1 mlppp interfaces found
Example 5—Displays statistics about all configured MLPPP member links configured
in bundle group1
host1#show ppp interface mlppp group1 statistics
PPP interface mlppp group1 is up
PPP multilink member-interface ATM 10/0.10 is up
No baseline has been set
Interface statistics
packets
octets
errors
discards
PPP multilink member-interface ATM 10/0.11 is down (lower layer down)
No baseline has been set
Interface statistics
packets
octets
errors
discards
PPP multilink member-interface ATM 10/0.12 is down (lower layer down)
No baseline has been set
Interface statistics
packets
octets
errors
discards
PPP multilink member-interface ATM 10/0.13 is down (lower layer down)
No baseline has been set
Interface statistics
packets
octets
errors
discards
1 mlppp interfaces found
Example 6—Displays status information about the specified MLPPP bundle
host1#show ppp interface mlppp group1 status
PPP interface mlppp group1 is up
1 mlppp interfaces found
Example 7—Shows complete configuration, statistics, and status information about
the specified MLPPP bundle
host1#show ppp interface mlppp group1 full
PPP interface mlppp group1 is up
Network interface administrative status is open
Configured network protocol is IPCP
IPCP protocol configuration
configured
in out
0 0
170 690
0 0
0 0
in out
0 0
50 0
0 0
0 0
in out
0 0
50 0
0 0
0 0
in out
0 0
50 0
0 0
0 0
true
Copyright © 2010, Juniper Networks, Inc.