JunosE 11.3.x Link Layer Configuration Guide
606
PPP State Log—Enabled or disabled
PPP Chap Challenge Length—Minimum and maximum Chap Challenge length
PPP Passive Mode—Enabled or disabled
PPP Multilink—Enabled or disabled
PPP IPCP Netmask Option—Enabled or disabled
PPP IPCP Lockout Option—Enabled or disabled
PPP Max-negotiations IPCP—Maximum number of renegotiation attempts that the
router accepts before terminating a PPP session
PPP AAA Profile—AAA profile associated with this PPP interface
PPP Multilink Fragmentation—Enabled or disabled
PPP Multilink Fragment Size—Multilink fragment size for this PPP interface
PPP Multilink Reassembly—Enabled or disabled
PPP Multilink Mrru—Multilink MRRU value for this PPP interface
PPP Hash Link Selection— Hash-based link selection for a PPP interface; enabled
or disabled
PPP Initiate IP—Initiation of IPv4 over this PPP interface; enabled or disabled
PPP Initiate IPv6—Initiation of IPv6 over this PPP interface; enabled or disabled
PPP IPCP prompt-option dns—Prompts the CPE (Customer Premises Equipment)
to negotiate the IPCP primary and secondary DNS options that are locally available
with the broadband remote access server; enabled or disabled
PPPoE Max Sessions—Maximum number of PPPoE subinterfaces that can be on an
interface
PPPoE Always-offer—Router offers to set up a session for the client, even if the
router has insufficient resources to establish a session; enabled or disabled
PPPoE Remote-Circuit-Id—The router captures and processes a vendor-specific tag
containing a remote circuit ID transmitted from a digital subscriber line access
multiplexer (DSLAM); enabled or disabled
PPPoE Log PPPoeControlPacket—Enabled or disabled
PPPOE duplicate-protect—Enabled or disabled
PPPoE ACNAME—Access concentrator name
PPPoE URL—URL sent in PADM message to PPPoE clients
PPPoE MOTM—Message of the minute sent in the PADM message to PPPoE clients
Copyright © 2010, Juniper Networks, Inc.
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - LINK LAYER CONFIGURATION GUIDE 2010-10-13 and is the answer not in the manual?
Questions and answers