Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - LINK LAYER CONFIGURATION GUIDE 2010-10-13 Configuration Manual page 161

show frame-relay summary
Copyright © 2010, Juniper Networks, Inc.
Use to scan all defined Frame Relay interfaces and circuits; reports aggregate status
as one of the following:
Up—Traffic can flow on the interface
Down—Traffic cannot flow because of a problem in the network
Unavailable—Traffic cannot flow because hardware is unavailable
Example
host1#show frame-relay summary
28 interface(s) defined, 28 up, 0 down
840 sub-interface(s) defined, 840 up, 0 down
840 circuit(s) defined, 840 up, 0 down
See show frame-relay summary.
Chapter 2: Configuring Frame Relay
129