Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - LINK LAYER CONFIGURATION GUIDE 2010-10-13 Configuration Manual page 493

Copyright © 2010, Juniper Networks, Inc.
Oper/Admin MTU—Operational MTU, which is the MTU at which the interface actually
operates, and administrative MTU, which is the MTU configured for the interface;
the administrative MTU displays 1518 (the default value) if not configured
In—Analysis of inbound traffic on this interface
Bytes—Number of bytes received in error-free packets
Packets—Number of packets received
Multicast—Number of multicast packets received
Broadcast—Number of broadcast packets received
Errors—Total number of errors in all received packets; some packets might contain
more than one error
Discards—Total number of discarded incoming packets
Out—Analysis of outbound traffic on this interface
Bytes—Number of bytes sent
Packets—Number of packets sent
Multicast—Number of multicast packets sent
Broadcast—Number of broadcast packets sent
Errors—Total number of errors in all transmitted packets; some packets might
contain more than one error
Discards—Total number of discarded outgoing packets
ARP Statistics—Analysis of ARP traffic on this interface; In fields are for traffic received
on the interface and Out fields are for traffic sent on the interface
ARP requests—Number of ARP requests
ARP responses—Number of ARP responses
Errors—Total number of errors in all ARP packets
Discards—Total number of discarded ARP packets
Total bridge1483 interfaces—Total number of bridged Ethernet interfaces configured
on the router; this is the only information that appears when you specify the summary
keyword
Example 1—Displays full configuration and status information
host1#show bridge1483 interface
Interface
------------------------- ---------- -------------- ------- ----------
ATM 5/1.1
Chapter 14: Configuring Bridged Ethernet
Status MAC Address
Up ----.----.---- Static
Oper/Admin
Type MTU
1500/1684
461