JunosE 11.3.x Link Layer Configuration Guide
306
Any combination of bundles that does not exceed the 252 available E1 channels (for
example, 252 single-link T1 bundles, 34 eight-link bundles, or 33 eight-link bundles
and 8 single-link bundles)
On a CT3/T3-F0 line module with a CT3/T3 12 I/O module, you can configure:
Member links from different T3 ports in the same bundle
Any combination of bundles that does not exceed the 336 available T1 channels (for
example, 336 single-link T1 bundles, 42 eight-link bundles, or 41 eight-link bundles
and 8 single-link bundles)
On an ES2-S1 Service IOA, you can configure:
Up to 16,000 member links per line module, not to exceed a total of 12,000 MLPPP
bundles per chassis
Any combination of bundles that does not exceed either of these maximums (for
example, 4000 single-link bundles, 4000 two-link bundles, 4000 four-link bundles,
and 2000 eight-link bundles)
On an OCx/STMx ATM line module and its corresponding line modules, you can
configure:
Up to 8000 member links per line module, not to exceed a total of 8000 MLPPP
bundles per chassis
Any combination of bundles that does not exceed either of these maximums (for
example, 4000 single-link bundles, 4000 two-link bundles, 2000 four-link bundles,
and 1000 eight-link bundles)
On a Service line module (SM), you can configure:
Up to 16,000 member links per line module, not to exceed a total of 12,000 MLPPP
bundles per chassis
Any combination of bundles that does not exceed either of these maximums (for
example, 4000 single-link bundles, 4000 two-link bundles, 4000 four-link bundles,
and 2000 eight-link bundles)
On a shared tunnel-server port configured on a GE-2 or GE-HDE line module and
corresponding line modules, you can configure:
Up to 8000 member links per line module, not to exceed a total of 8000 MLPPP
bundles per chassis
Any combination of bundles that does not exceed either of these maximums (for
example, 4000 single-link bundles, 4000 two-link bundles, 2000 four-link bundles,
and 1000 eight-link bundles)
On an ES2-S1 GE-4 IOA, ES2-S1 GE-8 IOA, ES2-S1 OC3-8 STM1 ATM IOA, and ES2-S1
OC12-2 STM4 ATM IOA modules that pair with an ES2 4G LM on E120 and E320 routers,
you can configure:
MLPPP bundles with one or more links per bundle for dynamic
MLPPP-over-PPPoE-over-Ethernet configurations.
Copyright © 2010, Juniper Networks, Inc.