4.
Related Topics
Example: Configuring Multiclass MLPPP on a Static Interface
The following example shows how to configure multiclass MLPPP on a static MLPPP
interface. To configure multiclass MLPPP you first define the traffic classes that need
to be mapped to the multilink classes. You configure multiclass MLPPP on the static
MLPPP interface and optionally configure fragmentation and reassembly on the
interface.
1.
2.
3.
4.
For more information about configuring a dynamic profile for multiclass MLPPP,
see Configuring a Profile in JUNOSe Link Layer Configuration Guide, Chapter 17,
Configuring Dynamic Interfaces.
Configure fragmentation and reassembly on the multiclass MLPPP interface.
host1(config-profile)#ppp multilink multiclass fragmentation best-effort voice
low-loss low-latency
host1(config-profile)#ppp multilink multiclass reassembly best-effort voice
low-loss low-latency
Configuring Multiclass MLPPP on page 352
Define the QoS traffic classes.
host1 (config)#traffic-class video
host1 (config-traffic-class)#fabric-strict-priority
host1 (config)#traffic-class low-loss
host1 (config-traffic-class)#fabric-strict-priority
For more information about QoS traffic classes, see Traffic Class and Traffic-Class
Groups Overview.
Specify the interface and the encapsulation method on which you want to
configure MLPPP
host1(config)#interface gigabitEthernet 3/0/0
host1(config-if)#encapsulation pppoe
host1(config)#interface gigabitEthernet 3/0/0.10
host1(config-if)#encapsulation mlppp
Configure multiclass MLPPP on the static interface.
host1(config-if)#ppp multilink multiclass multilink-classes 3
host1(config-if)#ppp multilink multiclass traffic-class best-effort video low-loss
Configure fragmentation and reassembly on the multiclass MLPPP interface.
host1(config-if)#ppp multilink multiclass fragmentation best-effort video low-loss
host1(config-if)#ppp multilink multiclass reassembly best-effort video low-loss
Example: Configuring Multiclass MLPPP on a Static Interface
Chapter 10: Configuring Multiclass Multilink PPP
357