Figure 22: Ge-2 Line Module Using Physical Port Redundancy; Figure 23: Single-Homed Ge-2 Line Module Configuration; Figure 24: Single-Homed Fe-8 Line Module Configuration (1:N) - Juniper JUNOSE SOFTWARE 11.0.X - LINK LAYER CONFIGURATION GUIDE 4-1-2010 Configuration Manual

Chapter 6: Configuring 802.3ad Link Aggregation and Link Redundancy

Figure 22: GE-2 Line Module Using Physical Port Redundancy

Figure 23 on page 213 displays a single-homed configuration with port 0 backing up
port 1 on a GE-2 line module.

Figure 23: Single-Homed GE-2 Line Module Configuration

Figure 24 on page 213 displays an FE-8 line module with a link failure in a 1:N
FE-8 Line Module
single-homed configuration.
Configurations

Figure 24: Single-Homed FE-8 Line Module Configuration (1:N)

Figure 25 on page 214 displays an FE-8 line module with four redundant Ethernet
links in a 1:1 configuration.
213
Ethernet Link Redundancy Overview