Monitoring Chassis Information - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
Table 123: Summary of Key System Properties Output Fields (continued)
Field Values
Idle Time How long the user has been idle.
Related
Documentation

Monitoring Chassis Information

Purpose
Action
Meaning
Table 124: Summary of the Key Output Fields for Chassis Information
Field
Routing Engine Details
652
®
OS for EX Series Ethernet Switches, Release 10.4
Monitoring System Process Information on page 654
Understanding J-Web User Interface Sessions on page 155
Use the monitoring functionality to view chassis properties such as general switch
information, temperature and fan status, and resource information for the EX Series
switch.
To view chassis properties in the J-Web interface, select Monitor > System View >
Chassis Information.
To view chassis properties in the CLI, enter the following commands:
show chassis environment
show chassis fpc
show chassis hardware
Table 124 on page 652 gives information about the key output fields for chassis information.
NOTE: For an EX2200, EX3200, or EX4500 switch or an EX4200 standalone
switch, the FPC slot number refers to the switch itself and is always 0. In a
Virtual Chassis configuration, the FPC slot number refers to the member ID.
In an EX8200 switch, the FPC slot number refers to the line card slot number.
Values
Select the
Master
to view details about the backup Routing Engine.
Additional Information
tab to view details about the master Routing Engine or select
Backup
Copyright © 2010, Juniper Networks, Inc.