Set Chassis Display Message - Juniper JUNOS OS 10.3 - SOFTWARE Manual

set chassis display message

Syntax
Syntax (TX Matrix
Router)
Syntax (TX Matrix Plus
Router)
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
set chassis display message "message"
<permanent>
set chassis display message "message" (lcc number | scc)
<permanent>
set chassis display message "message " (fpc-slot slot-number | lcc number | sfc number)
<permanent>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
option for TX Matrix Plus router introduced in Junos OS Release 9.6.
sfc
Display or stop a text message on the craft interface display, which is on the front of the
router, or on the LCD panel display on the switch. The craft interface alternates the display
of text messages with standard craft interface messages, switching between messages
every 2 seconds. By default, on both the router and the switch, the text message is
displayed for 5 minutes. The craft interface display has four 20-character lines. The LCD
panel display has two 16-character lines, and text messages appear only on the second
line.
"message" —Message to display. On the craft interface display, if the message is longer
than 20 characters, it wraps onto the next line. If a word does not fit on one line, the
entire word moves down to the next line. Any portion of the message that does not
fit on the display is truncated. An empty pair of quotation marks (" ") deletes the
text message from the craft interface display. On the LCD panel, display, the message
is limited to 16 characters.
—(TX Matrix Plus routers and EX4200 switches only) On the router,
fpc-slot slot-number
display the text message on the craft interface for a specific Flexible PIC Concentrator
(FPC). Replace
slot-number
the text message for a specific member of a virtual chassis, where
slot-number corresponds to the member ID. Replace
0 through 9.
—(TX Matrix and TX Matrix Plus routers only) On a TX Matrix router, display
lcc number
the text message on the craft interface display of a specified T640 router (or line-card
chassis) that is connected to the TX Matrix router. On a TX Matrix Plus router, display
the text message on the craft interface display of a specified T1600 router (or
line-card chassis) that is connected to the TX Matrix Plus router. Replace
with a value from through
0
permanent —(Optional) Display a text message on the craft interface display or LCD panel
display permanently.
—(TX Matrix routers only) Display the text message on the craft interface display of
scc
the TX Matrix router (or switch-card chassis).
Chapter 17: Operational Mode Commands for System Setup
with a value from through
0
slot-number
.
3
. On the switch, display
31
fpc-slot
with a value from
number
271