Complete Software Guide for Junos
Checking Active Alarms with the J-Web Interface
Purpose
Action
Meaning
Table 120: Summary of Key Alarm Output Fields
Field
Values
Type
Category of the alarm:
Severity
Alarm severity—either major (red) or minor (yellow).
Description
Brief synopsis of the alarm.
Time
Date and time when the failure was detected.
Related
Documentation
Monitoring Chassis Alarms for an EX8200 Switch
Purpose
644
®
OS for EX Series Ethernet Switches, Release 10.4
Use the monitoring functionality to view alarm information for the EX Series switches
including alarm type, alarm severity, and a brief description for each active alarm on the
switching platform.
To view the active alarms:
Select
Monitor> Events and Alarms > View Alarms
1.
Select an alarm filter based on alarm type, severity, description, and date range.
2.
Click
.
3.
Go
All the alarms matching the filter are displayed.
NOTE: When the switch is reset, the active alarms are displayed.
Table 120 on page 644 lists the alarm output fields.
Chassis—Indicates an alarm condition on the chassis (typically an environmental alarm such as
one related to temperature).
System—Indicates an alarm condition in the system.
Monitoring System Log Messages on page 641
Dashboard for EX Series Switches on page 630
Understanding Alarm Types and Severity Levels on EX Series Switches on page 629
This document provides information on chassis alarm conditions, and how you should
respond when a certain chassis alarm is seen on your switch.
in the J-Web interface.
Copyright © 2010, Juniper Networks, Inc.