Table of Contents
Advertisement
CHAPTER 2
Planning Your Virtual Network
Configuring Devices Overview
Copyright © 2010, Juniper Networks, Inc.
When you use Network and Security Manager (NSM) to manage your devices, you are
creating a virtual network that represents your physical network. Using this virtual network,
you can create, control, and maintain the security of your physical network at a system
level.
This chapter provides information to help you decide how best to create your virtual
network and simplify management tasks.
NOTE: Not all devices support all features described in this guide. For
device-specific datasheets that include an updated feature list for each
device, go to
http://www.juniper.net
select the product family.
This chapter contains the following sections:
Configuring Devices Overview on page 41
Configuring IDP-Capable Devices Overview on page 45
Simplifying Management on page 55
Creating an Information Banner on page 58
To manage Juniper Networks devices that already exist on your network, you can import
their device configurations into NSM. Each imported device appears in the NSM UI, where
you can view or make changes to the device, such as change settings in the device
configuration, edit the security policy for the device, and upgrade device firmware.
For new devices that do not yet exist on your network, you can create their device
configuration in NSM. When you physically deploy your device, you can install the modeled
device configuration on that device to instantly get it up and running. After you install the
modeled configuration on the device, you can manage the device just as you would an
imported device.
. In the Products and Services section,
41
Advertisement
Table of Contents
