Chassis Viewer; Table 113: Chassis Viewer For Ex2200 Switches; Table 114: Chassis Viewer For Ex3200 And Ex4200 Switches - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Chassis Viewer

Table 113: Chassis Viewer for EX2200 Switches

Field
Front View
Interface status
Rear View
Management ( me0 ) port
Console port
USB port
Fan tray
Power supply

Table 114: Chassis Viewer for EX3200 and EX4200 Switches

Field
Front View
Copyright © 2010, Juniper Networks, Inc.
You can click the
Rear View
to see the front of the image. In a Virtual Chassis configuration, the
disabled if the switch is not selected.
Table 113 on page 633—Describes the chassis viewer for EX2200 switches.
Table 114 on page 633—Describes the chassis viewer for EX3200 and EX4200 switches.
Table 115 on page 635—Describes the chassis viewer for EX4500 switches.
Table 116 on page 636—Describes the chassis viewer for EX8208 switches.
Table 117 on page 638—Describes the chassis viewer for EX8216 switches.
Description
In the image, the colors listed below denote the interface status:
Green—Interface is up and operational.
Yellow—Interface is up but is nonoperational.
Gray—Interface is down and nonoperational.
Hover the mouse pointer over the interface (port) to view more information.
The management port is used to connect the switch to a management device for out-of-band
management.
The console port is used to connect the switch to a management console or to a console server.
(You might do this for initial switch configuration.)
Indicates the USB port for the switch.
NOTE: We recommend you use USB flash drives purchased from Juniper Networks for your
EX Series switch.
Hover the mouse pointer over the fan tray icon to display Name, Status, and Description
information.
Hover the mouse pointer over the power outlet icon to display Name, Status, and Description
information.
Description
button to see the back of the chassis image. Click
Chapter 33: System Monitoring Overview
Front View
Rear View button is
633