Chapter 42 Low-Power Timer (Lptmr); Lptmr Pulse Counter Input Options - NXP Semiconductors freescale KV4 Series Reference Manual

Chapter 42
Low-Power Timer (LPTMR)
42.1 Chip-specific LPTMR information
42.1.1 LPTMR prescaler/glitch filter clocking options
The prescaler and glitch filter of the LPTMR module can be clocked from one of four
sources determined by the LPTMR0_PSR[PCS] bitfield. The following table shows the
chip-specific clock assignments for this bitfield.
The chosen clock must remain enabled if the LPTMR is to
continue operating in all required low-power modes.
LPTMR0_PSR[PCS]
00
01
10
11
See Clock Distribution

42.1.2 LPTMR pulse counter input options

The LPTMR_CSR[TPS] bitfield configures the input source used in pulse counter mode.
The following table shows the chip-specific input assignments for this bitfield.
Freescale Semiconductor, Inc.
NOTE
Prescaler/glitch filter clock
number
0
1
2
3
for more details on these clocks.
KV4x Reference Manual, Rev. 2, 02/2015
Preliminary
Chip clock
MCGIRCLK — internal reference clock
(not available in VLPS/VLLS modes)
LPO — 1 kHz clock (not available in
VLLS0 mode)
ERCLK32K — secondary external
reference clock
OSCERCLK_UNDIV — Undivided
external reference clock (not available in
VLLS0 mode)
1063